Travel Trailer Lift Blocks

By | April 10, 2022

Travel Trailer Lift Blocks. Always remember that travel trailers are heavier than cars and should be handled accordingly. We can also supply longer u bolts if these are needed to install the lift blocks.

0313 RAM 2500 2WD 3 PIN 3in. Fabricated Lift Blocks
0313 RAM 2500 2WD 3 PIN 3in. Fabricated Lift Blocks from www.offroadwarehouse.com

The blocks can be interlocked to one another to provide additional height if needed. There are options available depending on how big the diameter of your trailer axles are. If playback doesn't begin shortly, try restarting your device.

Similar To The Curt Manual Jack, This One Does Not Have A Footpad So We Recommend Packing Your Own.

I lifted my travel trailer a couple of years ago. Is it important that your travel trailer is insulated. I drilled a hole for a new longer spring center bolt in the middle of each block and bolted them to the bottom of each spring.

I Would Like To Know The Best Way To Get All Four Wheels Off The Ground At The Same Time To Service Wheels, Besides Rolling Onto Blocks To Get One Axle At A Time.

If you want a basic jack that can lift up to 5,000 pounds, the bulldog fulton sidewind is our favorite. The goal of this process is to lift a few of your tires up on rv leveling blocks. The blocks can be interlocked to one another to provide additional height if needed.

We Offer Blocks Sold In Pairs Or As Kits Complete.

Designed to be placed between your axle and leaf springs, suspension lift blocks come in a variety of heights and two basic styles. I got some 2×2 flat stock, cut them slightly longer than the spring pad on the axle. With the ball unlocked, use the jack to lift the trailer up and off of the hitch ball.

I Do Not Recommend Using A Leaf Spring Spacer (Lift Block) On Your Trailer.

Keep your trailer in line with this system that uses a telescoping bar with friction pads to correct trailer sway. I had a local spring shop bend me up some new u bolts. The ubolts are also one size lareger for more strength.

I Think You Can Do It If You Do It Right.

The lift blocks have a nib that locks into the axle on one side and a recessed hole on the other end to accept the head of the center bolt of the leaf spring. And 2in wide trailer leaf springs from 1000lbs to 7000lbs. With all the weight on one axle the ubolts still have several inches of clearance and will not hit the frame.

Leave a Reply

Your email address will not be published.